Now you can install a CB or scanner antenna on the bed rail of your pick-up without drilling holes in the exterior of the vehicle. See installation art. You get a quality stainless steel mount and 18 ft (5.5m) of professional grade Fire-Flex coaxial cable (with FireStik's exclusive Fire-Ring connector) all in one package! And, if that isn't enough, you save money by getting it all in a kit!  

The mount in this mini-kit is exclusively available from Firestik. They designed it just for you pick-up truck owners. The mount goes nicely into one of the stake holes found on the bed rail of full size pick-up trucks. The stainless steel bracket drops in and is locked into place with stainless steel hardware. There are no visible mounting holes required. They have even included a gasket to protect the finish on your truck.

Mini-kits give you the freedom to create your own personalized antenna kit. Any of FireStik's standard 3/8"-24 threaded antennas or accessories will screw directly into the antenna stud. Pick any color Firestik, Firestik II, Firefly, Road Pal, Scanner, 2-meter or Mach-10 antenna up to 4' (1.2m) to complete your installation. Each mini-kit contains a FREE microphone hanger. 

Important Consideration - When mounted in either of the stake hole pockets directly behind the vehicle cab, antennas that are shorter than 4-feet will experience substantial reflection from the metallic corners of the cab (between the side and rear glass).  Antennas shorter than 4-feet will, in most likelihood, be difficult if not impossible to tune to a satisfactory SWR.

The PL-259 connector (radio end) is supplied in this kit but is not installed on the coax cable.  This allows the cable to be routed into the vehicle through a smaller (0.375") hole. A grommet is supplied.  After the connector is placed on the coax, the center conductor MUST  be soldered to the PL connector.

Limited Warranty - Coax Cable 1 year, SS Mount 2 Years