Firestik CB Antenna Mounts

Shipping Rate Banner

FireStik CB antenna mounts are made for just about every antenna mounting application

  • WSB4-A

    FireStik WSB4-A Widget Swivel Bracket Mounts

    From: $15.95

    The mounting stud attaches to a chrome plated swivel bracket allowing the antenna angle to be adjusted perpendicular to the mounting plane. This allows the antenna angle to be corrected with the mount on the left or right edge of a trunk, hatchback or bumper. Hardware and mounting stud included. 1 YEAR WARRANTY  

  • FireStik SSJ4-A Jeep Fender Mount

    FireStik SSJ4-A Stainless Steel Jeep Fender Mounts for 3/8″x24 Thread

    From: $16.95

    FireStik Stainless Steel Jeep Fender Mounts for 3/8"x24 Thread - SSJ4-A These mounts were designed around the new Jeep Wranglers body style (97-99). The mount allows the antenna to be mounted on either the left or right side of the vehicle. The stainless steel mount and support bracket are made from 12 guage (0.109") stainless…

  • SSF4A

    FireStik SSF4A Stainless Steel Wide, Extended Flat Mounts

    $16.95

    If your looking for a heavy-duty stainless steel flat mount ... look no more. These mounts offer numerous mounting options. The bracket is 2" (51mm) wide, 5" (127mm) long and 0.100" (2.5mm) thick stainless steel. There are four mounting holes and enough stainless steel hardware supplied to fill each one. The stud mount hole has…

  • SSF4

    FireStik SSF4 Stainless Steel Wide, Extended Flat Mount

    $14.95

    If your looking for a heavy-duty stainless steel flat mount ... look no more. This mount offers numerous mounting options. The bracket is 2" wide, 5" long and 0.100" thick stainless steel. There are four mounting holes and enough stainless steel hardware supplied to fill one. The stud mount hole has a full 1" set…

  • SS64A

    FireStik SS64A Stainless Steel 3-Way Mirror, Rail, or Side Mount with PL259 Screw on Mount

    $19.95

    This is the stainless steel version of FireStik's most popular mount! The mounting clamp can be positioned horizonatally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such…

  • SS64 FIRESTIK STAINLESS STEEL 3 WAY MIRROR, RAIL, OR SIDE MOUNT

    FireStik SS64 Stainless Steel 3 Way Mirror, Rail, or Side Mount with Stud Mount

    $18.95

    This is the stainless steel version of FireStik's most popular mount! The mounting clamp can be positioned horizontally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as…

  • SS3M2F

    FireStik SS3M2F Medium Duty Stainless Steel Spring with Two Female Ends

    $13.95

    This is a DOUBLE FEMALE threaded spring -  For use in special applications where the mount and the antenna both have male 3/8" x 24 threaded ends. This medium duty spring works well with FireStik's 2ft "KW" & "FS" series antennas as well as the 3ft "FL" or "RP" antennas  

  • SS3M

    FireStik SS3M Stainless Steel Antenna & Mount Protecting Spring Medium Duty

    $11.95

    Every antenna should have a spring. Springs protect the antenna, mount and vehicle. These springs are made from long lasting, top grade electro-polished stainless steel. The upper and lower inserts are made of chrome-plated machine brass and have standard 3/8"-24 threads to fit all Firestik antennas, mounts and accessories. The medium duty model works especially…

  • SS3H

    FireStik SS3H Stainless Steel Antenna & Mount Protecting – Spring Heavy Duty

    $12.95

    Every antenna should have a spring. Springs protect the antenna, mount and vehicle. These springs are made from long lasting, top grade electro-polished stainless steel. The upper and lower inserts are made of chrome-plated machine brass and have standard 3/8"-24 threads to fit all Firestik antennas, mounts and accessories. The heavy duty model may be…

  • SS34M-H

    FireStik SS34M-H Stainless Steel Combo Spring & Stud Mount – Four to Choose From

    From: $12.95

    FireStik Stainless Steel Combo Spring & Stud Mount - Four to Choose From Save both space and money when you decide you want a spring under your antenna. Instead of buying a stud mount and a spring as individual components, you can buy one part and have it all. The springs are made of stainless…

  • SS294A

    FireStik SS294A Pick-Up “Over Rail” Stake Hole Mounts

    $17.95

    FireStik Pick-Up "Over Rail" Stake Hole Mounts This stainless steel mount locks into any of the stake hole pockets along the edge of a pick-up truck bed. There is no need to drill any holes in the vehicle. The mount can be used on bed rails with protective covers (such as those on the newer…

  • SS274A

    FireStik SS274A Stainless Steel Adjustable Hood/Trunk/Hatch Channel Mount

    $19.95

    This mount was specifically designed for hood, trunk and hatchback applications. However, the versatility of this mount allows you to mount it in many ways. Once you have it in your hand you will see the numerous possibilities. All bracket parts are made of stainless steel. Since the mount is located on the inside channel…

  • SS274

    FireStik SS274 Stainless Steel Adjustable Hood/Trunk/Hatch Channel Mount

    $18.95

    This mount was specifically designed for hood, trunk and hatchback applications. However, the versatility of this mount allows you to mount it in many ways. Once you have it in your hand you will see the numerous possibilities. All bracket parts are made of stainless steel. Since the mount is located on the inside channel…

  • SS204A

    FireStik SS204A Stainless Steel – Adjustable Vertical Door Jamb Mount for 3/8″-24 Threaded Ant.

    $21.95

    This mount was specifically designed to allow antenna installations on vehicles where other mounts may not work. The primary goal was to offer a mount that could be affixed to a vertical inner door jamb such as that which might be found on the rear or side door of a cargo type van. Since the…

  • SS204

    FireStik SS204 Vertical Door Jamb Mount

    $19.95

    This mount was specifically designed to allow antenna installations on vehicles where other mounts may not work. The primary goal was to offer a mount that could be affixed to a vertical inner door jamb such as that which might be found on the rear or side door of a cargo type van. Since the…

  • SS194A

    FireStik SS194A Stainless Steel Pick-Up Extended Stakehole Mount

    $19.95

    Those square holes in the bed rails of full size pick-up trucks are the prefect location for a "no-holes" antenna mount. The flat upper bracket is 6" (152mm) long and extends out over the bed rail so you may mount your antenna without losing the ability to mount a camper shell. Includes stud mount, stainless…

  • SS194

    FireStik SS194 Pick-Up Extended Stake Hole Mounts

    $17.95

    Those square holes in the bed rails of full size pick-up trucks are the prefect location for a "no-holes" antenna mount. The flat upper bracket is 6" (152mm) long and extends out over the bed rail so you may mount your antenna without losing the ability to mount a camper shell. Includes stud mount, stainless…

  • SS184A

    FireStik SS184A Stainless Steel Dodge Ram/Dakota Hood Mounts

    $16.95

    The SS-184A contains the same bracket as the SS-184. The difference is the SO-239 base stud mount for screw-on coax connection. This mount works very well as a universal flat mount for bumpers, pick-up bed rails, etc. The mount is rated for antennas up to 4'  in length. The bracket is 2" wide by 4.1" long.…

  • SS184

    FireStik SS184 Stainless Steel Dodge Ram/Dakota Hood Mounts

    $14.95

    The primary use for the SS-184 stainless steel mount is for antenna installation on the 1994 thru 2004 Dodge Ram and Dakota pick-ups Due to body changes made in 2005, this mount will not fit 2005 and newer vehicles). When the hood is open, the fender bolt near the firewall is removed (right or left…

  • SS174

    FireStik SS174 Stainless Steel Hood/Trunk Mount – Tall

    $16.95

    Designed for hood and trunk applications, these stainless steel mounts go on the inside channel of your hood or trunk. There are no visible mounting holes required. All mounting hardware (also stainless steel) is hidden inside the hood or trunk channel. This mount comes complete with antenna mounting stud. Click here to see installation line…

  • SS134A

    FireStik SS134A Stainless Steel Clamp-On Flat Mounts

    $16.95

    This stainless steel mount was specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. This mount can be used in other applications as well.  

  • SS134

    FireStik SS134 Stainless Steel Clamp-On Flat Mount

    $14.95

    This stainless steel mount was specifically designed to mount antennas on the flat side-view mirror arm supports commonly found on pick-ups. When used in this manner, there is no need to drill any holes in the vehicle or mirror support arm. Of course, this mount can be used in other applications as well. The upper bracket…

  • SS134

    FireStik SS124A Stainless Steel Flat Universal Mount w/K4a Stud

    $14.95

    This mount is one of Firestik's most popular stainless steel mounts for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4" long by 1" wide. The supplied stainless steel mounting bolt is a hefty…

  • SS124

    FireStik SS124 Stainless Steel Flat Universal Mount

    $12.95

    This mount is one of Firestik's most popular stainless steel mount for flat surface applications. Applications are, for the most part, limited only by your imagination. Some popular applications include flat mirror arms, rails, bars, or step bumpers. The bracket itself is about 4" long by 1"  wide. The supplied stainless steel mounting bolt is a hefty…

  • M2 Mountm2

    FireStik M2 Moulded Side Mount

    $16.95

    If you want a sleek, stylish looking side mount, you will want to look at the M-2! This mount is specifically designed for use on vertical surfaces. It has an attractive black molded body that looks great on any vehicle. When installed, the coax connectors are concealed on the inside of the vehicle (requires one…

  • K74

    FireStik K74 No-Hole Trunk Lip Antenna Mount

    $15.95

    The trunk lip bracket slides over trunk edge (normally between the trunk deck and the rear window). Two set screws are tightened from the underside to hold the bracket in place. No holes are required on the vehicle. The rearward side of the bracket has support feet with rubber bumpers to protect the vehicle finish.…

  • K64A

    FireStik K64A Chrome Plated 3-Way Mirror, Rail, or Side Mount with Screw on Coaxial Connection

    $17.95

    These are FireStik's most popular mounts! The mounting clamp can be positioned horizonatally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of…

  • K64

    FireStik K64 Chrome Plated 3-Way Mirror, Rail, or Side Mount with K-4 Stud and Ring Terminal

    $15.95

    These FireStik's most popular mounts! The mounting clamp can be positioned horizonatally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a…

  • K6

    FireStik K6 Chrome Plated 3-Way Mirror, Rail, or Side Mount (without stud)

    $10.95

    These are FireStik's most popular mounts! The mounting clamp can be positioned horizontally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a…

  • k4r

    FireStik K4R Antenna Stud Mount For FireRing Coax

    $7.95

    The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end…

  • K4DD

    FireStik K4DD 2.5″ Circular Disk Mounts

    $12.95

    Attractive mounts for trunk and roof applications. Includes two 2 1/2" circular discs (stainless steel top disc) Mounting stud and a rubber gasket to protect vehicle finish. The K-4DD model has a low underside profile for confined  space installs.  Requires a 1/2" hole and flat surface for installation. 1 YEAR WARRANTY  

  • k4a

    FireStik K4A Antenna Stud Mount “World’s Best” with Screw-On Coaxial Stud

    $8.95

    The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end…

  • k4

    FireStik K4 Antenna Stud Mounts “World’s Best” with Ring Terminal Connector

    $6.95

    The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer of your transmitted and received signals to and from the transceiver. If the stud mount doesn't perform that task efficiently you end…

  • K24A

    FireStik K24A Plated Heavy Duty Side Mount with Screw On Coax Connector

    $14.95

    These mounts are similar to FireStik's popular 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket supplied in the 3-way mounts, you can save a couple of dollars with these mounts. All of these mounts are specifically used for mounting antennas to a flat vertical surface, such as…

  • K24

    FireStik K24 Plated Heavy Duty Side-Mount with Ring Terminal Connector

    $12.95

    These mounts are similar to FireStik's popular 3-way mounts without the clamp. If you know that your installation will not require the clamping bracket supplied in the 3-way mounts, you can save a couple of dollars with these mounts. All of these mounts are specifically used for mounting antennas to a flat vertical surface, such as…

  • K1A

    FireStik K1A “Push-N-Twist” Quick Disconnect – Internal Locking

    $18.95

    There are times when it is convenient to be able to quickly remove your antenna without fumbling around for tools. Perhaps your antenna is too tall to fit into your garage, or you often park in a high theft area. Maybe you don't use your antenna every day but want to be able to snap…

  • 40807477_8813505_full.jpg

    FireStik K154A Flat Surface Mounts

    $13.95

    These mounts are very similar to, but more compact than the disc stud mounts. The small 11/4" x 23/4" rectangular mounts can be used for trunk, roof, and fender applications. Mounts include rubber gasket toprotect vehicle finish. Complete with K-4A antenna stud. 1 YEAR WARRANTY  

  • k11

    FireStik K11 Heavy-Duty Magnetic Antenna Mount

    $32.95

    The strongest single-magnet mount you can own! FireStik's mag-mount has a 4.9" (125mm) base. The ceramic magnet uses a heavy steel cup to concentrate the magnetic field, therefor increasing the holding power of the assembly. To protect the vehicle finish, an adhesive backed mylar disk is affixed to the bottom of the magnet.  

  • DM4A

    FireStik DM4A Dome Mount

    $16.95

    As you would expect, Firestik takes the popular Dome Mount to the next level! FireStik makes the worlds best! Instead of using a multi-piece mold insert they designed their mounts with a one piece insert. The chances of developing internal resistance is totally eliminated as is the possibility of having water leak through the center to corode…

  • DM164A

    FireStik DM164A Aluminum Mirror Brackets With Dome Mounts

    $22.95

    Designed to handle heavy-duty antenna installations. FireStik put a 5/8" hole in their aluminum mirror brackets to accommodate their DM-4A Dome Mount. The DM-164A has a horizontal gripping groove in the clamp and L-bracket. This mount is made specifically for horizontal mirror arms, luggage racks or rails on boats or motorhomes. You get all the features…