FireStik MK294R Stainless Steel Mount For Pick-Up Stake Hole

$28.95

  • Now you can install a CB or scanner antenna on the bed rail of your pick-up without
    drilling holes in the exterior of the vehicle.
  • You get a quality stainless steel mount and 18 ft. of professional grade Fire-Flex coaxial
    cable (with FireStik’s exclusive Fire-Ring connector) all in one package!
  • The mount in this mini-kit is exclusively available from Firestik. They designed it just
    for you pick-up truck owners.
  • The mount goes nicely into one of the stake holes found on the bed rail of full size pick-up
    trucks.

 

 

Description

  • The stainless steel bracket drops in and is locked into place with stainless steel hardware.
  • There are no visible mounting holes required. They have even included a gasket to protect
    the finish on your truck.
  • Any of FireStik’s standard 3/8″-24 threaded antennas or accessories will screw directly into
    the antenna stud.
  • Each mini-kit contains a FREE microphone hanger. Important Consideration
  • When mounted in either of the stake hole pockets directly behind the vehicle cab, antennas
    that are shorter than 4-feet will experience substantial reflection from the metallic corners
    of the cab (between the side and rear glass). 
  • Antennas shorter than 4-feet will, in most likelihood, be difficult if not impossible to tune to
    a satisfactory SWR.
  • The PL-259 connector (radio end) is supplied in this kit but is not installed on the coax cable.
    This allows the cable to be routed into the vehicle through a smaller hole.
  • A grommet is supplied.  After the connector is placed on the coax, the center conductor MUST
    be soldered to the PL connector.
  • Limited Warranty – Coax Cable 1 year, SS Mount 2 Years   

Additional information

Weight1.15 lbs
Dimensions7 x 6 x 3 in