Wilson Silver Load FGT Series Rigid Whips With Adjustable Tips

From: $31.95

The Wilson Silver Load FGT CB antenna was designed with its exclusive impedance matching transformer and silver plated wire for maximum radiation…..

- Clear selection
SKU: N/A Category:


  • Wilson Silver Load FGTĀ Series Whips
  • Wilson’s “tunable tip” allows for fine tuning SWR and resonant frequency.
  • 3/8″ Diameter fiberglass construction
  • Standard 3/8″ x 24 chromed brass ferrule
  • Fully linear top loaded maximum transfer of power
  • Design incorporates an 18 guage “silver plated” copper wire to provide higher efficiency
  • Antenna has unique ground lead to help insure reduced static ignition interference
  • Static reducing weather cap
  • Clamshell
  • 5 ft. Antenna comes in Black and White only

Testing the popular fiberglass antennas showed some brands insert losses, like a dummy load, to make their antenna look good on the SWR meter, but sacrificed most of the power gain.

Wilson designed the Silver Load, with its exclusive impedance matching transformer, to give good SWR without sacrificing power gain. Additionally, using spaced windings on the top load to eliminate the dielectric losses, and silver plated wire for maximum radiation, Wilson has the best performing fiberglass antenna available.

PERFORMANCE GUARANTEE: The Wilson Silver Load FGT fiberglass antenna will outperform the fiberglass antenna it replaces or your money back. This guarantee is good for 15 days from the date of purchase at the original purchase point only, and with dated sales receipt.

ANTENNA POWER GAIN: the amount of improvement in power amplification over another antenna. The higher gain antenna will transmit & receive farther, but the actual distance will vary depending on the gain, ground terrain and other environmental factors. Individual test results may vary due to the vehicle’s ground plane and matching configuration.

EXAMPLE:The Wilson X has 20% more power gain at 27.185 MHz than Brand X antenna. This means that if the Wilson transmits 100 watts of power, then Brand X will need 120 watts of power to have the same signal strength at the receive end.

Additional information

Weight N/A
Dimensions N/A

2 Foot, 3 Foot, 4 Foot, 5 Foot


Black, Red, White